WIKA CF2S - Manual (Page 13)

Operating Instructions Temperature Indicating Controller CF2S
V1.2 • 08/2004 - 13 -
4.2 Operations
The PV display indicates the sensor type and the SV display indicates the rated value
selected by Sensor input designation (page 10, 11) for approx. 2 seconds after the power
is turned on. See [table 4.2-1].
During this time, all outputs and LED indicators are in their off status.
After that, the actual temperature is displayed on the PV display, main setting value on the SV
display and starts control.
(1) PV/SV display mode
Instrument power ON
Warm-up status (for 2s)
[Table 4.2-1] Rated value
[Table 4.2-1]
°C °F
Input
PV display SV display PV display SV display
K
J
R
B
PL-ll
N
S
E
T
C
Pt100
JPt100
Pt100
PV/SV display mode Mode during control.
Actual Main The contents of setting items nor setting values
Temperature setting value cannot be changed.