Inscribing a standard mass – RADWAG WPW/T 60/HR3/FH Waterproof Control Scales User Manual
Page 102
Advertising
• Put a load to be a standard mass on the weight pan,
• After the equilibrium is reached (
) press
,
• You will see the indication of 100,00%,
• From this moment all results will be displayed in percents:
Return to weighing:
See 11.3.
24.6.3. Inscribing a standard mass
Procedure:
• Enter
DEVIATIONS and then:
- 102 -
Advertising
This manual is related to the following products: