RADWAG WPW/T 60/HR3/FH Waterproof Control Scales - Manual (Page 104)

24.7.2. Starting the work mode
• WGH. ANIMALS mode is signalled by showing ► pictogram
in the right side of the picture.
24.7.3. Procedure of weighing animals
• After starting ANIM. WEIGH. (see 24.7.2) put the animal on the
platform,
• Press to start the process of weighing,
• You will see a set of dashes on the display <- - - - - - - - - - ->
showing the progress of weighing during the time set in
<P7.3.1 WEIGH. TIME> - (see 24.7.1),
• After the procedure of weighing is completed the result will be latched,
• Additionally you will hear a short “beep” sound and see Hold
pictogram in the left part of the display:
• Before initiating the next weighings press
key,
• Weighing procedure can be terminated while in progress
by pressing .
Return to weighing:
See 11.3.
- 104 -