RADWAG WPW/T 60/HR3/FH Waterproof Control Scales - Manual (Page 84)

22.2. LED power setting
According to the requirements (e.g. intensity of external light) it is possible
to change the light flux from LEDs in the scale of 0% to 100%.
Procedure:
• Enter
<P9.2 DIODES> according to 11.2. and then:
Return to weighing:
See 11.3.
22.3. Work modes for LEDs
In <P9.2 DIODES> users can chose a work mode for LEDs.
Procedure:
• Enter
<P9.2 DIODES> according to 11.2. and then:
- 84 -