Example of dosing application, Xample of dosing application – RADWAG WPW/T 60/HR3/FH Waterproof Control Scales User Manual
Page 163
• In the overlap <Transmission setting>:
− Set the communication type „Ethernet Transmission TCP”,
− „IP address 1” the same as <P2.4.2 IP ADDRESS> in the scale,
− „Port”/”Com” the same as <P2.4.5 LOCAL PORT> in the scale,
• Confirm the changes by clicking
,
• Rerun the program,
• Press
the
„Connect” button,
• The appropriate communication with scales is signalled by pictogram
in the left part of the display,
• Transmission problems are signalled by the message window:
32.3. Example of dosing application
A standard WPW scale (3 inputs / 3 outputs in connector)
have a task to perform a two-threshold dosing (bulk/precise dosing)
in the manual mode with external buttons START and STOP process.
Caution:
Simple dosing systems can use one of three different methods: 1 – manual
mode, 2 – automatic mode, 3 – negative dosing (see ch.. 24.8.1).
Procedure:
1. According to ch.11.2.:
• Enter the group of parameters <P8.1 EXTERNAL BUTTONS>
and configure the buttons according to the table below:
TARE B.
NO
PRINT B.
NO
ZERO B.
NO
START B.
IN1
STOP B.
IN2
EXTERN. START
NO
- 163 -