RADWAG WPW/T 60/HR3/FH Waterproof Control Scales - Manual (Page 63)

OPERATOR - Can perform weighings, edit P1, P4, P9
parameters; cannot edit databases and erase
statistics; cannot change weighing thresholds
Min, Max, cannot adjust the standard mass
in modes “counting pieces” and “deviations”.
ADVANCED OP. - Can perform weighings and edit parameters
except P8, P10 and P6.1, P6.2, P6.3; can
edit databases except operators;
ADMIN - Have a full access to parameters and
databases, can perform user calibration
(in non-verified scales).
Return to weighing:
See 11.3.
18.3. Password type
It is possible to set the password type to inscribe.
Procedure:
• Enter
<P6 DATABASE> according to 11.2. and then:
- 63 -