RADWAG WPW/T 60/HR3/FH Waterproof Control Scales - Manual (Page 112)

24.8.7. Starting work modes
After entering the DOSING mode the pictogram is displayed. Press
to start a dosing process. After starting it starts blinking,
keyboard is blocked until the process is completed.
The process completion is signalled by displaying a message:
< END OF DOSING > in the bottom line of the display:
This process can be stopped only by pressing . A message will
be displayed in the bottom line: < STOP DOSING >.
When the procedure is broken or completed is displayed continuously.
Dosing process can be also terminated by pressing . You will see:
- 112 -