RADWAG PUE C/31H/Z Indicator - Manual (Page 12)

Notice:
After pressing + keys’ functions changes. The way of operation
in this mode is described in details further in this manual.
8. INSCRIPTIONS ON THE DISPLAY
No Text string Description
1. FIL Filter level
2. bAud Transmission baud rate
3. PCS Piece counting
4. HiLo +/- control according to a standard mass
5. rEPL Automatic printout
6. StAb The condition of printing data
7. Auto Autozero correction
8. t1 Power save – time to switch off while no operation
9. toP Latch of the max measurement
10. Add Totalizing
11. AnLS Weighing animals
12. tArE Memory of 9 tare values
13. Indication in autozero zone (indication = exact zero)
14. Stable result (ready to read)
15. PCS Operation mode –counting pieces
16. kg (g) Operation mode – weighing
17. Rechargeable battery pack or battery discharged (BAT-LO)
18. Net Tare function has been used
19. Min
+/- control with reference to the standard mass : setting
the lower threshold or mass below the first threshold
20. OK
+/- control with reference to the standard mass:
load masa between the thresholds
21. Max
+/- control with reference to the standard mass: setting
the upper threshold or mass over the second threshold
- 12 -