RADWAG PUE C/31H/Z Indicator - Manual (Page 43)

14.8.1. Enabling the work mode
Procedure:
• Enter
to <Add> function:
• A letter „P” in the left side of the display is a confirmation that
<Add> function have been selected:
14.8.2. Totalizing procedure
• Enter
<Add> function according to ch. 14.8.1,
• Put the first load on the pan. If the weighing procedure is performed
in a container put the container on the pan first and tare it. Then put
the first load on the pan and confirm it by pressing when stable
(signalled by ),
• You will see a sum of weighings on the display, the „▲” pictogram
in the upper right corner will be displayed and the weighing result
will be printed on the printer connected to the indicator.
- 43 -