RADWAG PUE C/31H/Z Indicator - Manual (Page 56)

- 56 -
18.3. Respond message format
After sending a request message you can receive:
XX_A CR LF command accepted and in progress
XX_D CR LF command completed (appears only after XX_A)
XX_I CR LF command comprehended but cannot be executed
XX _ ^ CR LF command comprehended but time overflow error appeared
XX _ v CR LF command comprehended but the indication below the
XX _ OK CR LF Command done
ES_CR LF Command not comprehended
XX _ E CR LF
error while executing command – time limit for stable result
exceeded (limit time is a descriptive parameter of the scale)
XX
- command name
_ - substitutes spaces
18.4. Command’s description
18.4.1. Zeroing
Syntax Z CR LF
Possible answers:
Z_A CR LF
Z_D CR LF - command accepted and in progress
- command completed
Z_A CR LF
Z_^ CR LF - command accepted and in progress
- command comprehended but zero range overflow appeared
Z_A CR LF
Z_E CR LF - command accepted and in progress
- time limit for stable result exceeded
Z_I CR LF - command comprehended but cannot be executed
18.4.2. Tarring
Syntax: T CR LF
Possible answers: