RADWAG PUE C/31H/Z Indicator - Manual (Page 34)

no – mode is disabled
YES – mode is enabled
Return to weighing:
See 9.2.2.
14.2. Selecting quantity of operation modes
This function enables user to set if ,after pressing key, all operating
modes will be accessible (ALL) or only one from the list chosen and used
by operator.
Procedure:
• Enter the submenu <P4.Func> and then:
After choosing setting press key. The program will return to
displaying name of submenu <P4.1.FFun>.
Return to weighing:
See 9.2.2.
- 34 -