RADWAG PUE C/31H/Z Indicator - Manual (Page 51)

• Take off the weight , then the following sequence of screens will
appear
• Calibration process can be terminated anytime by pressing
which is signalled by the following message on the display:
• Return to weighing with saving changes that have been made.
Caution:
If the calibration process (span adjustment) lasts longer than 15 the
<Err8> message will be displayed and short audible signal will be
emitted. Press to perform calibration again with more stable
ambient conditions!
15.2. Start mass adjustment
If the scale does not require the full calibration process sit is possible
to adjust only a new start mass.
Procedure:
• Enter the submenu <P6.CAL> and then:
- 51 -