RADWAG PUE C/31H/Z Indicator - Manual (Page 42)

14.7. Measurement max force on the pan – latch
Procedure:
• Enter
to <toP> function:
• Confirmation of choice of <toP> function is indication of the
Max pictogram:
• Apply a force to the weighing pan.
• The display of scale will latch the maximum value
of the force remove loads from the pan
• Before the next measurement press the
key.
Return to weighing:
• Press the
key twice.
14.8. Totalizing
Scale software is equipped in a totalizing function of single weighings.
The totalizing procedure can be documented on the printer connected
to the indicator.
- 42 -