Replacement of worn batteries – RADWAG PUE C/31H/Z Indicator User Manual

Page 7

Advertising
background image

Notice:
Some symbols on accumulators identify harmful elements/compounds:
Pb = lead,
Cd = cadmium,
Hg = mercury.



2.2.1. Power supply of weighing indicators in plastic casings

Indicators in plastic casing are intended to be supplied from a power
adapter or from NiMH rechargeable battery pack (standard equipment).
New rechargeable batteries should be formatted according to the
description in the chapter 14.4.4. of this manual.

Alternatively, you can use to power the device R6 size standard non-
rechargible batteries. If you want to use normal batteries instead of
rechargeable ones,
proceed as follows:

• Before installing non-rechargeable batteries turn on the device

and set <5.5.CHr6> to <no>, to switch off charging,

• Then install the batteries.

- 7 -

Installing batteries without changing <5.5.CHr6> to <no>
may cause damage of batteries and the indicator.




2.2.2. Replacement of worn batteries

Users have the ability to replace worn out batteries to new ones in
weighing indicators PUE C/31 (plastic casing).

Procedure:

• Open the lid of the chamber for

batteries placed in the bottom of
the indicator casing:

Advertising
This manual is related to the following products: