RADWAG PUE C/31H/Z Indicator - Manual (Page 5)

- 5 -
1. INTENDED USE
PUE C/31 designed for quick and precise measurements of weighed
loads masses. Tarring in full weighing range enables to determine net
mass of weighed loads. Optional additional display enables observing
of weighing process by another person.
Functions:
• backlight of display
• level of filtration
• autozero
function
• setting baud rate of transmission
• continuous data transmission for RS 232
• automatic operation for RS 232
• designed
printouts
• designation minimum mass for function operating
• counting
pieces
• +/- mass control
• percentage deviation from standard mass
• latch of maximum scale indication
• automatic
tare
• memory of tare
• Memory of 9 tare values
• inscribing tare value
• automatic scale switch-off
• user
calibration
• Totalizing
• Weighing
animals
User functions may have attribute of accessibility. For this reason
it is possible to adjust scale to individual needs to provide access
to only these functions which are currently needed. Attribute
determination accessible / inaccessible is possible in user
menu and described in further part of manual.