Easy setup, 2 connecting up, Connecting audio and video cables – Pioneer DV-737 User Manual
Page 18: Connecting control cables, Of your pioneer amplifier/receiver to the, Of this unit to the, Of other pioneer components
18
2 Connecting Up
En / Fr
Easy Setup
Important: Before making or changing any rear panel connec-
tions, make sure that all components are switched off and unplugged
from the wall outlet.
This easy setup is the minimum set of connections you need to start
watching DVD video discs. Both sound and picture are fed directly to
your TV using the supplied audio and video cables. For other possible
connections, see
pages 22 and 26.
Connecting audio and video cables
Be sure to insert each plug fully for
the best connection. The plugs and
jacks are colour-coded to make
connection easier.
Connecting control cables
Use a stereo mini-plug cable (not supplied) to connect the
CON
-
TROL
OUT
of your Pioneer amplifier/receiver to the
CONTROL
IN
of this unit. This allows you to operate this unit with the amplifier/
receiver’s remote control. See the instruction manual that came with
your amplifier/receiver for more detailed instructions. Add more
components to the chain by connecting the
CONTROL
OUT
of this
unit to the
CONTROL
IN
of other Pioneer components.
R
L
Y
PB
PR
525i
(480i)
525p
(480p)
AUTO
PAL
MENU
SELECT
NTSC
AV1(RGB)
-TV
AV2
COAX
OPT
AC IN
AUDIO OUT
VIDEO OUT
S-VIDEO OUT
CONTROL
TV SYSTEM
DIGITAL OUT
IN
OUT
COMPONENT VIDEO OUT
1
1
2
1
2
2
1
2
AV CONNECTOR
1
2
3
Connect to a composite video input on your
TV using the supplied yellow video cable.
Plug into a standard AC wall
outlet.
Connect to a pair of stereo audio inputs on your
TV using the supplied red/white stereo audio
cable.