Switching the muting/attenuation level, Setting the volume for guidance and, Phone – Pioneer AVIC-F950BT User Manual

Page 127: Correcting the current location, Setting the volume, Switching the muting/ attenuation level, Setting the volume for guidance and phone, Customising preferences

Advertising
background image

Switching the muting/
attenuation level

You can select the muting/attenuation level of
“Mute Timing”. This setting is also effective
for a mute signal that has been received from
the MUTE lead connected to the navigation
unit.
p This menu is not available when

“Mute Timing” is “Off”.

1

Display the

“Volume/Position adjust-

ment

” screen.

= For details, refer to Displaying the adjust-

ment and correction screen on page 126.

2

Touch [Volume/Mute settings].

The

“Volume/Mute settings” screen appears.

3

Touch [Mute].

4

Touch the item you want to configure.

! –20dB:

The volume becomes 1/10.

! –10dB:

The volume becomes 1/3.

! Mute:

The volume becomes 0.

Setting the Volume for
Guidance and Phone

The sound volume for the navigation can be
set. You can separately set the volume of the
route guidance and the beep sound.

1

Display the

“Volume/Position adjust-

ment

” screen.

= For details, refer to Displaying the adjust-

ment and correction screen on page 126.

2

Touch [Volume/Mute settings].

The

“Volume/Mute settings” screen appears.

3

Touch [Volume].

The

“Volume Settings” screen appears.

4

Touch [+] or [

–] to set their volume.

On this screen, you can operate the following
items.

! Guidance

This setting controls the guidance volume
of navigation.

! Phone volume.

This setting controls the incoming voice vo-
lume.

! Ringtone

This setting controls the incoming ring tone
volume.

p “Ringtone” and “Phone volume.” adjust-

ments are needed only when a mobile
phone featuring Bluetooth technology is
connected.

# If you touch the key next to “Beep”, the setting
is changed.

! On (default):

A beep sounds.

! Off:

The beep sound is muted.

Correcting the current location

Touch the screen to adjust the current position
and direction of the vehicle displayed on the
map.

1

Display the

“Volume/Position adjust-

ment

” screen.

= For details, refer to Displaying the adjust-

ment and correction screen on page 126.

2

Touch [Modify Current Location].

3

Scroll to the position where you want

to set, then touch [OK].

4

Touch the arrow key on the screen to

set the direction, then touch [OK].

Engb

127

Chapter

26

Customising

pr
eferences

Customising preferences

Advertising
This manual is related to the following products: