Pioneer AVIC-F950BT - Manual (Page 128)

Switching the road on
which you are driving
When you are driving in the area where an or-
dinary road and toll road run parallel, and if
the system calculates your vehicle position to
be on a road opposite from the one on which
you are actually driving, you can switch your
vehicle position to the right road, i.e. either the
ordinary road or the toll road.
1 Display the
“Volume/Position adjust-
ment
” screen.
= For details, refer to Displaying the adjust-
ment and correction screen on page 126.
2 Touch [Find alternative location].
The vehicle position is corrected to the right
type of road.
p The vehicle position may not be corrected
in some cases.
p During the route guidance, the vehicle posi-
tion is corrected before the route is
searched again.
Displaying the screen for
navigation function settings
1 Press the HOME button to display the
“Top Menu” screen.
2 Touch .
The
“Edit/Settings” menu appears.
3 Touch [Navi settings].
The
“Navi Settings” menu appears.
4 Touch the item you want to configure.
5 Touch to end the setup.
Setting the speed limit display
Selects whether to display or hide the speed
limit of the current road.
Speed Limit
1 Display the “Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 128.
2 Touch [Map Display].
3 Touch [Show Speed Limit].
The setting screen appears.
4 Touch the item you want to set.
! Hide (default):
Hides the speed limit on the map.
! View:
Displays the speed limit on the map.
Changing the road colour
You can set the road colour to bluish or red-
dish.
1 Display the “Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 128.
Engb
128
Chapter
26 Customising preferences