Pioneer AVIC-F950BT - Manual (Page 76)

1 Tune into a TP station or another en-
hanced network
’s TP station.
2 Touch [TA].
3 Touch [On].
p To turn traffic announcements standby off,
touch [ TA] again.
4 Use the VOL (+/
–) button to adjust the
TA volume when a traffic announcement
begins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
5 Touch [Cancel] while a traffic announce-
ment is being received to cancel the an-
nouncement.
The tuner returns to the original source but re-
mains in standby mode until [
TA] is touched
again.
You can also cancel the announcement by
changing the source or band.
p The system switches back to the original
source following traffic announcement re-
ception.
p Only TP stations and other enhanced net-
works
’ TP stations are tuned in during seek
tuning or BSM when the TA function is on.
Using news programme
interruption
p This function can only be used on the FM
band.
When a news programme is broadcast from a
PTY code news station, the navigation system
can switch from any station to the news broad-
cast station. When the news programme
ends, reception of the previous programme re-
sumes.
1 Touch on the
“Radio” screen.
The
“Function” menu appears.
2 Touch [News].
3 Touch [On] or [Off].
! Off (default):
Turns the News function off.
! On
Turns the News function on.
p A news programme can be cancelled by
touching [ Cancel].
p You can also cancel the news programme
by changing the source or band.
Tuning into alternative frequencies
p This function can only be used on the FM
band.
If you are listening to a broadcast and the re-
ception becomes weak or there are other pro-
blems, the navigation system will
automatically search for a different station in
the same network that is broadcasting a stron-
ger signal.
1 Touch on the
“Radio” screen.
The
“Function” menu appears.
2 Touch [AF].
3 Touch [On] or [Off].
! On (default):
Turns the AF function on.
! Off:
Turns the AF function off.
p Only RDS stations are tuned in during seek
tuning or BSM when AF is on.
p When you recall a preset station, the tuner
may update the preset station with a new
frequency from the station
’s AF list. No pre-
set number appears on the display if the
RDS data for the station received differs
from that for the originally stored station.
p Sound may be temporarily interrupted by
another programme during an AF fre-
quency search.
p AF can be turned on or off independently
for each FM band.
Engb
76
Chapter
12 Using the radio