Pioneer AVIC-F950BT - Manual (Page 72)

You can listen to the radio using the naviga-
tion system. This section describes operations
for radio.
The functions related to RDS (Radio Data Sys-
tem) are only available in areas with FM sta-
tions broadcasting RDS signals. Even if the
navigation system is receiving an RDS station,
not all the functions related to RDS will be
available.
Starting procedure
1 Display the AV operation screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
2 Touch [Radio] on the left edge of the
screen to display the
“Radio” screen.
3 Touch the band indicator to switch a
band.
= For details, refer to Using the touch panel
keys on page 73.
4 Use the touch panel keys on the screen
to control the radio.
= For details, refer to Using the touch panel
keys on page 73.
Reading the screen
1
b c a
5 2 4 3
7
8
6
9
d
1 Source icon
Shows which source has been selected.
2 Programme service name indicator
Shows the programme service name (station
name) of the current station.
p When “AM” is selected, this indicator is
not shown.
3 PTY indicator
Shows the programme type of the current sta-
tion (when available).
p When “AM” is selected, this indicator is
not shown.
4 Current time
5 Band indicator
Shows which band the radio is tuned to: FM1,
FM2, FM3 or AM.
6 TEXT indicator
Shows when radio text is received.
7 TRFC indicator
Shows the status of traffic announcements.
8 NEWS indicator
Shows the status of news programmes.
9 Preset number indicator
Shows the selected preset item.
a Frequency indicator
b Signal level indicator
c STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
p When “AM” is selected, this indicator is
not shown.
d Radio text display area
Displays the radio text currently received.
p When “AM” is selected, this indicator is
not shown.
Engb
72
Chapter
12 Using the radio