Pioneer AVIC-F950BT - Manual (Page 15)

Attaching the detachable faceplate
1 Slide the detachable faceplate all the
way into the navigation system.
Make sure the detachable faceplate is se-
curely connected to the mounting hooks of
the navigation system.
2 Push the lower part of the detachable
faceplate until you hear a click.
If you fail to successfully attach the detach-
able faceplate to the navigation system, try
again but be careful not to force it as the
panel could be damaged.
Adjusting the LCD panel angle
p This function is only available on AVIC-
F50BT.
WARNING
Keep hands and fingers clear of the unit when
opening, closing, or adjusting the LCD panel. Be
especially cautious of children
’s hands and fin-
gers.
CAUTION
Do not open or close the LCD panel by force. This
may cause a malfunction.
1 Press the h button.
The
“Monitor Setup” screen appears.
2 Touch or to adjust the
angle.
3 Touch .
p The adjusted angle of the LCD panel will be
memorised and the LCD panel will automa-
tically return to that angle the next time the
LCD panel is opened or closed.
Inserting and ejecting a disc
Inserting a disc (for AVIC-F50BT)
WARNING
! Keep hands and fingers clear of the unit when
opening, closing, or adjusting the LCD panel.
Be especially cautious of children
’s hands
and fingers.
! Do not use with the LCD panel left open. If the
LCD panel is left open, it may result in injury
in the event of an accident.
CAUTION
! Do not open or close the LCD panel by force.
This may cause a malfunction.
! Do not operate this navigation system until
the LCD panel has completely opened or
closed. If this navigation system is operated
while the LCD panel is opening or closing, the
LCD panel may stop at that angle for safety.
! Do not place a glass or can on the open LCD
panel. Doing so may break this navigation sys-
tem.
! Do not insert anything other than a disc into
the disc-loading slot.
1 Press the h button.
The
“Monitor Setup” screen appears.
2 Touch [Open].
The LCD panel opens, and the disc-loading
slot appears.
3 Insert a disc into the disc-loading slot.
The disc is loaded, and the LCD panel closes.
Ejecting a disc (for AVIC-F50BT)
1 Press the h button.
The
“Monitor Setup” screen appears.
Engb
15
Chapter
02
Basic
operation
Basic operation