Pioneer AVIC-F950BT - Manual (Page 152)

2 Insert an SD memory card into the SD
card slot.
= For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 16.
A message confirming whether to update the
settings appears.
3 Touch [Yes].
Update starts.
After the settings are updated, a message noti-
fying completion of update appears.
4 Touch [OK].
The navigation system restarts.
Using the rear view camera
functions
The following two functions are available. The
rear view camera feature requires a separately
sold rear view camera (e.g. ND-BC6). (For de-
tails, consult your dealer.)
Rear view camera
The navigation system features a function that
automatically switches to the full-screen
image of the rear view camera installed on
your vehicle. When the gearstick is in the RE-
VERSE (R) position, the screen automatically
switches to full-screen rear view camera
image.
Camera for Rear view mode
Rear view can be displayed at all times (e.g.
when monitoring an attached trailer, etc.) as a
split screen where map information is partially
displayed. Please note that with this setting,
camera image is not resized to fit, and that a
portion of what is seen by the camera is not
viewable.
= For details, refer to Setting for rear view
camera on page 152.
Setting for rear view camera
CAUTION
Pioneer recommends the use of a camera which
outputs mirror reversed images, otherwise the
screen image may appear reversed.
p Immediately verify whether the display
changes to a rear view camera image when
the gearstick is moved to REVERSE (R)
from another position.
p When the screen changes to full-screen
rear view camera image during normal
driving, switch to the opposite setting in
“Polarity”.
Setting the rear view camera activation
1 Display the
“System Settings” screen.
= For details, refer to Displaying the screen for
system settings on page 135.
2 Touch [Back Camera Settings].
The
“Back Camera Settings” screen appears.
3 Touch [Camera].
This changes the setting to
“On”.
p You can only switch to “Rear View” if this
setting is
“On”.
= For details of the operation, refer to Switch-
ing the view mode on page 32.
Setting the polarity of the rear view
camera
1 Display the “System Settings” screen.
= For details, refer to Displaying the screen for
system settings on page 135.
2 Touch [Back Camera Settings].
The
“Back Camera Settings” screen appears.
3 Touch [Polarity].
4 Touch [GND] or [Battery] to select an
appropriate setting for polarity.
! Battery (default):
Engb
152
Chapter
26 Customising preferences