Using the high pass filter 145, Using the subwoofer output 145, Enhancing bass (bass booster) 145 – Pioneer AVIC-F950BT User Manual

Page 145: Using sonic centre control 145, Customising preferences, Using the high pass filter, Using the subwoofer output, Enhancing bass (bass booster), Using sonic centre control

Advertising
background image

The following AV sources are set to the same
source level adjustment volume automatically.

! AV1 and AV2
! CD, ROM, and DivX
! SD and USB
! Bluetooth Audio and Aha Radio

(Bluetooth connection)

! iPod and Aha Radio (iPhone)

Using the high pass filter

When you cut lower sounds from the subwoo-
fer output frequency, activate

HPF (high pass

filter). Only frequencies higher than those in
the selected range are output from the front or
rear speakers.

1

Display the

“AV Sound Settings”

screen.

= For details, refer to Displaying the screen for

AV sound settings on page 141.

2

Touch [HPF].

3

Touch [On].

# If you touch [Off], the setting is turned off.

4

Each touch of

or

changes the

cut-off frequencies as follows:
50Hz

— 63Hz — 80Hz — 100Hz — 125Hz

Using the subwoofer output

The navigation system is equipped with a sub-
woofer output mechanism, which can be
turned on or off.

1

Display the

“AV Sound Settings”

screen.

= For details, refer to Displaying the screen for

AV sound settings on page 141.

2

Touch [Sub Woofer].

3

Confirm that the subwoofer output is

turned on.

p The default setting is “On”.

# If you touch [Off], the subwoofer output is
turned off.

4

Touch [Reverse] or [Normal] to select

the phase of subwoofer output.

5

Touch

or

next to

“Frequency(Hz)” to select cut-off fre-
quency.
Each time you touch

or

, cut-off fre-

quencies are selected in the following order:
50Hz

— 63Hz — 80Hz — 100Hz — 125Hz

Only frequencies lower than those in the se-
lected range are output from the subwoofer.

6

Touch [+] or [

–] next to “Level” to adjust

the output level.
“+6” to “–24” is displayed as the level is in-
creased or decreased.

Enhancing bass (Bass Booster)

You can enhance bass sounds that are often
muted by driving noise.

1

Display the

“AV Sound Settings”

screen.

= For details, refer to Displaying the screen for

AV sound settings on page 141.

2

Touch [Bass Booster].

3

Touch [+] or [

–] to adjust the range from

0 to 6.

Using sonic centre control

Sound that is suited for the listening position
can easily be created with this function.

Engb

145

Chapter

26

Customising

pr
eferences

Customising preferences

Advertising
This manual is related to the following products: