Pioneer AVIC-F950BT - Manual (Page 20)

4 Read the terms carefully, checking the
details, and then touch [OK] if you agree to
the conditions.
The map screen appears.
Regular startup
% Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
p The screen shown will differ depending on
the previous conditions.
p If the anti-theft function is activated, you
must enter your password.
p The terms appear if the previous condition
was the navigation screen.
Read the terms carefully, checking the de-
tails, and then touch [
OK] if you agree to
the conditions.
After you touch [
OK], the screen that was
displayed just before turning off the ignition
switch (ACC OFF) is displayed.
A message about the map
database
After you start using this navigation system, a
message related to map data may be dis-
played.
p This message is displayed the first time you
turn on the navigation system each month.
p Touch the message to close it or it will dis-
appear automatically after eight sec-
onds.
Demonstration images
If you do not operate this navigation system
for five minutes, demonstration images are
displayed.
p The demonstration images will not be dis-
played if you drive after mounting this navi-
gation system.
Temporarily clearing the
screen (navigation system
in standby mode)
You can temporarily clear the screen at night
or when the screen is too bright.
% Press and hold the MAP button.
The screen is cleared temporarily.
p If you touch the screen when the navigation
system is in standby mode, it reverts to the
original screen.
Also, if you press the
MAP button, the
standby mode is cancelled and the current
location screen is displayed. If you press
the
MODE button, the standby mode is
cancelled and the AV source screen is dis-
played.
p When the navigation system is in standby
mode, the navigation guidance does not
output the voice guidance. The audio sound
is output.
p The standby mode is not cancelled by turn-
ing ignition switch on or off.
Engb
20
Chapter
02 Basic operation