Messages for bluetooth functions, Appendix – Pioneer AVIC-F950BT User Manual

Page 169

Advertising
background image

Messages for Bluetooth functions

When problems occur with Bluetooth functions, an error message appears on the display. Refer
to the table below to identify the problem, then take the suggested corrective action. If the error
persists, record the error message and contact your dealer or your nearest Pioneer service centre.

Message

Cause

Action (Reference)

Currently unable to register

The Bluetooth device that you want
to register is under communication
such as transferring phone book.

After finishing the communication, register
the Bluetooth device again.

Unable to connect the device.
Try again later.

This navigation system is trying to
connect to the Bluetooth device
while performing the following op-
erations with another device.

! Registering the Bluetooth device
! Setting to connect the Bluetooth
device

! Transferring the phone book

After the operation of another device is com-
plete, reconnect the Bluetooth device.

Unable to register Bluetooth
device.

An error has occurred.

Set the

“Bluetooth On/Off” to “Off”, and

then set to

“On”. Subsequently, operate to

register again.

Could not find any available
phone.

No available phone is in the sur-
rounding area when the system
searches for connectable mobile
phones featuring Bluetooth wireless
technology.

! Activate the target phone’s Bluetooth wire-
less technology.

! Check whether your mobile phone is acti-
vated and, whether the distance to your mo-
bile phone is too far.

Unable to search for available
devices.

This navigation system is trying to
search for available device while
performing following operations.

! Registering the Bluetooth device
! Setting to connect the Bluetooth
device

! Transferring the phone book
! Deleting the registered Bluetooth
device

After finishing the operation, search for avail-
able devices again.

Device search failed.

An error has occurred.

Set the

“Bluetooth On/Off” to “Off”, and

then set to

“On”. Subsequently, search for

available devices again.

Unable to change device
name.

An error has occurred.

Set the

“Bluetooth On/Off” to “Off”, and

then set to

“On”. Subsequently, operate to

change the device name again.

Currently unable to delete.

This navigation system is trying to
delete the registered Bluetooth de-
vice while performing the following
operations.

! Using the hands-free phoning
! Registering Bluetooth device
! Setting to connect the Bluetooth
device

! Transferring the phone book

After finishing the operation, delete the
Bluetooth device again.

Delete failed

An error has occurred.

Set the

“Bluetooth On/Off” to “Off”, and

then set to

“On”. Subsequently, operate to de-

lete the Bluetooth device again.

Engb

169

Appendix

Appendix

Appendix

Advertising
This manual is related to the following products: