Pioneer AVIC-F950BT - Manual (Page 133)

2 Touch [Guide].
3 Touch [Auto reroute choice].
The setting screen appears.
4 Touch the item you want to set.
! Current route (default):
Selects the current route.
! Alt. route:
Selects an alternative route.
Displaying the distance and
estimated time
You can set the display information of the esti-
mated time of arrival in the route guidance.
1 Display the
“Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 128.
2 Touch [Guide].
3 Touch [Distance/ETA].
The setting screen appears.
4 Touch the item you want to set.
! Destination (default):
Displays the distance and the progress to
the destination, elapsed time and the esti-
mated time of arrival.
! Waypoint:
Displays the distance and the progress to
the next waypoint, elapsed time and the es-
timated time of arrival.
Setting the route alternatives
function to avoid traffic jams
and closed/blocked roads
When both
“Traffic avoidance” and “Auto re-
route
” are set to “On”, this navigation system
can calculate a route allowing for traffic jams
and closed/blocked roads when the system ac-
quires traffic information.
1 Display the
“Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 128.
2 Touch [Guide].
3 Touch [Traffic avoidance] and [Auto re-
route].
The setting screen appears.
4 Touch the item you want to set.
! On (default):
Suggests an alternative route to avoid
events on the route.
! Off:
Does not calculate a route automatically.
Setting the auto-zoom display
This setting enables switching to an enlarged
map around the point where your vehicle is
approaching an intersection, entrance/exit of
motorway or a junction.
1 Display the “Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 128.
2 Touch [Guide].
3 Touch [Close Up View].
The setting screen appears.
4 Touch the item you want to set.
! On (default):
Switches to an enlarged map.
! Off:
Does not switch to an enlarged map.
Changing the setting of the
navigation interruption screen
You can set whether to automatically switch to
the navigation screen from the AV screen
when your vehicle approaches a guidance
point such as an intersection.
1 Display the
“Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 128.
2 Touch [Guide].
3 Touch [AV Guide Mode].
The setting screen appears.
4 Touch the item you want to set.
! On (default):
Engb
133
Chapter
26
Customising
pr
eferences
Customising preferences