Pioneer AVIC-F950BT - Manual (Page 54)

! By event:
You can sort the traffic information ac-
cording to the incident.
The list will be sorted in the order of
closed/blocked roads, traffic jams, acci-
dents, road works and others.
4
The details of the selected incident are dis-
played.
5 Touch .
The previous screen returns.
Checking traffic
information on the route
All traffic information on the current route is
displayed on screen in a list.
1 Display the
“Information” screen.
= For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Trfc info.].
The
“Traffic information menu” screen ap-
pears.
3 Touch [Traffic on route].
The
“On route” screen appears.
The method for checking the content dis-
played on the screen is the same as
“Nearby”
screen.
= For details, refer to Checking all traffic infor-
mation on page 53.
How to read traffic
information on the map
The traffic event information displayed on the
map is as follows.
p A line is displayed only when the map scale
is 5 km (2.5 miles) or lower.
p Icons appear only when the scale on the
map is 20 km (10 miles) or lower. If the
scale is changed, the icons are resized ac-
cording to the selected scale.
Traffic event icon
!
with yellow line:
Slow and queuing traffic
! with red line:
Stationary traffic
!
with black line:
Closed/blocked roads
! etc.:
Accidents, constructions, etc.
Setting an alternative
route to avoid traffic jams
If the navigation system detects any traffic
jams on your current route, the system tries to
find a better route in the background.
p This function is available when both “Traf-
fic avoidance
” and “Auto reroute” are set
to
“On”.
= For details, refer to Setting the route al-
ternatives function to avoid traffic jams
and closed/blocked roads on page 133.
p The following types of traffic incidents on
the route will be checked for: slow, queuing
and stationary traffic, and closed/blocked
roads except for closed motorway exits/en-
trances.
Engb
54
Chapter
08 Using traffic information