Pioneer AVIC-F950BT - Manual (Page 149)

3 Touch [iPhone] or [Android].
! iPhone:
The connection setting of iPhone is en-
abled.
! Android:
The connection setting of smartphone
(Android device) is enabled.
p The [Apps] key icon of the “Top Menu”
screen varies according to the connection
setting.
p You cannot set to connect when your device
is connected to this navigation system with
a cable.
p When a device that supports Bluetooth SPP
(Serial Port Profile) is registered and prefer-
entially paired, the connection will set to
“Android” automatically.
Setting the keyboard language
with application for iPhone
p This function is only available in AppRadio
Mode on the iPhone.
You can use the keyboard in AppRadio Mode
by setting the language of the keyboard for
iPhone.
1 Set the language preference for the
keyboard of the iPhone.
2 Display the
“App settings” screen.
= For details of the operations, refer to Dis-
playing the screen for app settings on page
148.
3 Touch [App keyboard settings].
The
“App keyboard selection” screen ap-
pears.
4 Touch the desired language.
After the language is selected, the previous
screen returns.
Setting the rear output
The navigation system
’s rear output can be
used for a full-range speaker or subwoofer
connection. If you switch
“Rear SP” to
“Sub. W”, you can connect a rear speaker lead
directly to a subwoofer without using an auxili-
ary amp.
Initially, the navigation system is set for a rear
full-range speaker connection (
“Full”).
p Both rear speaker leads output and RCA
rear output are switched simultaneously in
this setting. (When you use the product
without RCA rear output, this setting only
applies to the rear speaker leads.)
p “Rear SP” can be set only when the source
is selected to
“Off”.
1 Disconnect the iPhone or smartphone
device.
2 Press the HOME button to display the
“Top Menu” screen.
3 Touch .
The
“Edit/Settings” screen appears.
4 Touch [AV Settings].
The
“AV Settings” menu appears.
5 Touch [Rear SP].
6 Touch [Full] or [Sub. W].
! Full (default):
When no subwoofer is connected to the
rear output, select
“Full”.
! Sub. W
When a subwoofer is connected to the rear
output, select
“Sub. W”.
Engb
149
Chapter
26
Customising
pr
eferences
Customising preferences