Pioneer AVIC-F950BT - Manual (Page 134)

Switches from the AV operation screen to
the map screen.
! Off:
Does not switch the screen.
p This setting is effective only when “Close
Up View
” is set to “On”.
Setting the App operation
screen interruption
You can set whether to automatically switch to
the navigation screen from the
AppRadio
Mode screen.
1 Display the
“Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 128.
2 Touch [Guide].
3 Touch [App Guide Mode].
The setting screen appears.
4 Touch the item you want to set.
! On (default):
Switches from the App operation screen to
the map screen.
! Off:
Does not switch the screen.
Changing the virtual speed of
the vehicle
You can set the average speed for the ordinary
road or motorway to calculate the estimated
time of arrival.
p This setting is enabled if the route calcula-
tion does not take account of traffic jams.
= For details, refer to Setting the route al-
ternatives function to avoid traffic jams
and closed/blocked roads on page 133.
1 Display the
“Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 128.
2 Touch [Guide].
3 Touch [Minor Ordinary Road], [Major
Ordinary Road] or [Motorway].
The setting screen appears.
4 Touch the item you want to set.
The estimated time of arrival is calculated
based on the average speed you set.
The average speed you can select for each
kind of road is as follows.
Minor Ordinary Road
! km:
20km/h, 30km/h, 40km/h (default),
50km/h, 60km/h
! mile or Mile&Yard:
10mph, 20mph, 25mph (default), 30mph,
40mph
Major Ordinary Road
! km:
50km/h, 60km/h, 70km/h (default),
80km/h, 90km/h
! mile or Mile&Yard:
30mph, 40mph, 45mph (default), 50mph,
55mph
Motorway
! km:
90km/h, 100km/h (default), 110km/h,
120km/h, 130km/h
! mile or Mile&Yard:
55mph, 60mph (default), 70mph, 75mph,
80mph
p The unit may vary depending on the set-
tings.
= For details, refer to Changing the unit be-
tween km and miles on page 134.
p The estimated time of arrival may not take
into account parameters other than this
speed value.
Changing the unit between km
and miles
This setting controls the unit of distance and
speed displayed on your navigation system.
1 Display the
“Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 128.
2 Touch [Guide].
3 Touch [km / mile].
The setting screen appears.
Engb
134
Chapter
26 Customising preferences