Pioneer DEH-P70BT - Manual (Page 22)

Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
! The default setting for Auto PI Seek is off.
See Switching Auto PI Seek on page 79.
Limiting stations to regional
programming
When AF is used to automatically retune fre-
quencies, the regional function limits the se-
lection to stations broadcasting regional
programs.
1 Use Multi-Control to select Regional.
Regional appears in the display.
2 Press Multi-Control to turn the regional
function on.
Regional ON appears in the display.
# To turn the regional function off, press
Multi-Control again.
Notes
! Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
! The preset number may disappear on the dis-
play if the tuner tunes in a regional station
which differs from the originally set station.
! The regional function can be turned on or off
independently for each FM band.
Receiving traffic
announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other networks TP station (a station
carrying information which cross-references
TP stations).
1 Tune in a TP or enhanced other net-
works TP station.
When you are tuned into a TP or enhanced
other networks TP station the TP ( ) indica-
tor will light.
2 Press TA/NEWS to turn traffic an-
nouncement standby on.
Press TA/NEWS and TA ON appears in the
display. The tuner will stand-by for traffic an-
nouncements.
# To turn traffic announcements standby off,
press TA/NEWS again.
3 Use Multi-Control to adjust the TA vo-
lume when a traffic announcement begins.
Rotate it to increase or decrease the volume.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4 Press TA/NEWS while a traffic an-
nouncement is being received to cancel the
announcement.
The tuner returns to the original source but re-
mains in the standby mode until TA/NEWS is
pressed again.
# You can also cancel the announcement by
pressing SOURCE, BAND or Multi-Control while
a traffic announcement is being received.
Notes
! You can also turn the TA function on or off in
the menu that appears by using
Multi-Control.
RDS
En
22
Section
05