Pioneer DEH-P70BT - Manual (Page 62)

Introduction of advanced
DAB tuner operation
1
1 Function display
Shows the function names.
1 Press Multi-Control to display the main
menu.
FUNCTION and AUDIO appear on the display.
2 Use Multi-Control to select FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3 Turn Multi-Control to select the func-
tion.
Turn Multi-Control clockwise to switch be-
tween the functions in the following order:
AS (announcement support)SF (service fol-
low)Primary/2nd (primary/secondary)
PTY search (available PTY search)
# You can also switch between the functions in
reverse order by turning Multi-Control counter-
clockwise.
# To return to the frequency display, press
BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the frequency display.
Switching the DAB display
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Service label (service label)SC label (ser-
vice component label)DAB text (dynamic
label)Ensemble label (ensemble label)
PTY (PTY label)
Note
With a service component that has no service
component label, dynamic label or PTY label,
switching to SC label, DAB text and PTY is not
possible.
Storing services
You can easily store up to six services for later
recall.
1 When you find a service that you want
to store in memory press LIST to switch to
the preset service list mode.
2 Use Multi-Control to select the preset
number.
Turn to change the preset number; press to se-
lect. 16 is displayed as the preset number is
selected.
3 Press Multi-Control and hold to store
the service in memory.
The selected service has been stored in mem-
ory.
# If you do not operate the list within about 30
seconds, the preset service list mode is canceled
automatically.
Note
Up to 18 services, six for each of the three bands,
can be stored in memory.
DAB tuner
En
62
Section
11