Pioneer DEH-P70BT - Manual (Page 23)

! The system switches back to the original
source following traffic announcement recep-
tion.
! Only TP and enhanced other networks TP sta-
tions are tuned in during seek tuning or BSM
when TA is on.
Using PTY functions
You can tune in a station by using PTY (pro-
gram type) information.
Searching for an RDS station by
PTY information
You can search for general types of broadcast-
ing programs, such as those listed on page
25.
1 Use Multi-Control to select PTY search.
PTY search appears in the display.
2 Push Multi-Control left or right to select
a programtype.
There are four program types:
News&INFPopularClassicsOthers
3 Press Multi-Control to begin the search.
When you press Multi-Control the program
type name in the display begins to flash. The
unit searches for a station broadcasting that
program type. When a station is found its pro-
gram service name is displayed.
# To cancel the search, press Multi-Control
again.
Notes
! The program of some stations may differ from
that indicated by the transmitted PTY.
! If no station is broadcasting the type of pro-
gram you searched for, Not found is dis-
played for about two seconds and then the
tuner returns to the original station.
Using news program interruption
When a news program is broadcast from a
PTY code news station the unit can switch
from any station to the news broadcast sta-
tion. When the news program ends, reception
of the previous program resumes.
% Press TA/NEWS and hold to turn on
news programinterruption.
Press TA/NEWS until News ON appears in
the display.
# To turn off news program interruption, press
TA/NEWS and hold until News OFF appears in
the display.
# A news program can be canceled by pressing
TA/NEWS.
# You can also cancel the news program by
pressing SOURCE, BAND or Multi-Control while
a news program is being received.
Note
You can also turn on or off news program in the
menu that appears by using Multi-Control.
RDS
En
23
English
Section
05