Pioneer DEH-P70BT - Manual (Page 73)

# If you do not operate the EQ-EX within about
four seconds, the display automatically returns to
the source display.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Use Multi-Control to select FAD.
FAD appears in the display.
# If the balance setting has been previously ad-
justed, BAL will be displayed.
2 Push Multi-Control up or down to ad-
just front/rear speaker balance.
Each time Multi-Control is pushed up or
down, the front/rear speaker balance moves
towards the front or rear.
F 15  R 15 is displayed as the front/rear
speaker balance moves from front to rear.
# F/R 0 is the proper setting when only two
speakers are used.
# When the rear output setting is Rear SP :S/W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 80.
3 Push Multi-Control left or right to ad-
just left/right speaker balance.
Each time Multi-Control is pushed left or
right, the left/right speaker balance moves to-
wards the left or right.
L 9  R 9 is displayed as the left/right speaker
balance moves from left to right.
Using the equalizer
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
Recalling equalizer curves
There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display Equalizer curve
SuperBass Super bass
Powerful Powerful
Natural Natural
Vocal Vocal
Custom Custom
Flat Flat
! Custom is an adjusted equalizer curve that
you create.
! A separate Custom curve can be created
for each source. (The built-in CD player and
the multi-CD player are set to the same
equalizer adjustment setting automati-
cally.) If you make adjustments, the equali-
zer curve settings will be memorized in
Custom.
! When Flat is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
Flat and a set equalizer curve.
% Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol-
lowing equalizers:
SuperBassPowerfulNaturalVocal
CustomFlat
Audio Adjustments
En
73
English
Section
14