Pioneer DEH-P70BT - Manual (Page 64)

Searching for service by
available PTY information
Available PTY search lets you see the list of
available PTYs that is in the current ensemble
and select one of them to receive.
! If there is no available PTY in the current
ensemble, you cannot switch to the avail-
able PTY search mode.
! Available PTY search is different from PTY
search. With this unit, you can operate only
the available PTY search.
1 Use Multi-Control to select PTY search.
PTY search appears in the display.
2 Push Multi-Control left or right to select
a programtype.
3 Press Multi-Control to begin the search.
DABreceives the desired PTY service.
Notes
! The PTY method displayed is narrow. The wide
method cannot be selected when using DAB
as source.
! If no service broadcasting the selected pro-
gramming type is found, Not found is dis-
played for about two seconds and then the
DABreturns to the previous service.
Using dynamic label
Displaying dynamic label
1 Press DISPLAY and hold to display dy-
namic label.
# You can cancel dynamic label display by
pressing DISPLAY or BAND.
# When no dynamic label is currently being re-
ceived, NO TEXT is displayed.
2 Push Multi-Control left or right to recall
the three most recent dynamic labels.
Pushing Multi-Control left or right switches
between the current and the three dynamic
label data displays.
# If there is no dynamic label data in memory
the display will not change.
3 Push Multi-Control up or down to
scroll.
Pushing Multi-Control up to go to the begin-
ning. Pushing Multi-Control down to scroll
the dynamic label data.
Storing and recalling dynamic
label
You can store data from up to six dynamic
label transmissions at buttons 16.
1 Display the dynamic label you want to
store in memory.
Refer to Displaying dynamic label on this page.
2 Press any buttons 16 on the remote
control and hold to store the selected dy-
namic label.
The memory number will display and the se-
lected dynamic label will be stored in memory.
The next time you press the same button on
the remote control in the dynamic label dis-
play the stored text is recalled from mem-
ory.
Selecting services from the
preset service list
Preset service list lets you see the list of preset
services and select one of them to receive.
1 Press LIST to switch to the service list
mode.
2 Use Multi-Control to select the desired
service.
Turn to change the service; press to select.
# You can also change the service by pushing
Multi-Control up or down.
# If you do not operate the list within about 30
seconds, the preset service list mode is canceled
automatically.
DAB tuner
En
64
Section
11