Pioneer DEH-P70BT - Manual (Page 27)

Introduction of advanced
built-in CD player operation
1
1 Function display
Shows the function status.
1 Press Multi-Control to display the main
menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use Multi-Control to select FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3 Turn Multi-Control to select the func-
tion.
Turn Multi-Control clockwise to switch be-
tween the functions in the following order:
Play mode (repeat play)Randommode
(random play)Scan mode (scan play)
Pause (pause)Compression (compres-
sion and BMX)Search mode (search meth-
od)TitleInput (disc title input)
# You can also switch between the functions in
reverse order by turning Multi-Control counter-
clockwise.
# To return to the playback display, press BAND.
Notes
! If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.
! TitleInput (disc title input) function is not
canceled automatically.
Repeating play
There are two repeat play ranges for the built-
in CD player: Disc repeat (disc repeat) and
Track repeat (one-track repeat).
1 Use Multi-Control to select Play mode.
Play mode appears in the display.
2 Press Multi-Control to select the repeat
range.
Press Multi-Control repeatedly until the de-
sired repeat range appears in the display.
! Disc repeat  Repeat the current disc
! Track repeat  Repeat just the current
track
Note
If you perform track search or fast forward/re-
verse during Track repeat, the repeat play range
changes to Disc repeat.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Use Multi-Control to select
Randommode.
Randommode appears in the display.
2 Press Multi-Control to turn random
play on.
Tracks will play in a random order.
# To turn random play off, press Multi-Control
again.
Built-in CD Player
En
27
English
Section
06