Pioneer DEH-P70BT - Manual (Page 24)

Receiving PTY alarm broadcasts
PTY alarm is a special PTY code for announce-
ments regarding emergencies such as natural
disasters. When the tuner receives the radio
alarm code, ALARM appears on the display
and the volume adjusts to the TA volume.
When the station stops broadcasting the
emergency announcement, the system re-
turns to the previous source.
! An emergency announcement can be can-
celed by pressing TA/NEWS.
! You can also cancel an emergency an-
nouncement by pressing SOURCE, BAND
or Multi-Control.
Using radio text
This tuner can display radio text data trans-
mitted by RDS stations, such as station infor-
mation, the name of the currently broadcast
song and the name of the artist.
! The tuner automatically memorizes the
three latest radio text broadcasts received,
replacing text from the least recent recep-
tion with new text when it is received.
Displaying radio text
You can display the currently received radio
text and the three most recent radio texts.
1 Press DISPLAY and hold to display radio
text.
Radio text for the currently broadcasting sta-
tion is displayed.
# You can cancel radio text display by pressing
DISPLAY or BAND.
# When no radio text is received, NO TEXT is
displayed.
2 Push Multi-Control left or right to recall
the three most recent radio texts.
Pushing Multi-Control left or right switches
between the current and the three radio text
data displays.
# If there is no radio text data in memory the dis-
play will not change.
3 Push Multi-Control up or down to
scroll.
Push Multi-Control up to go to the beginning.
Push Multi-Control down to scroll the radio
text data.
Storing and recalling radio text
You can store data from up to six radio text
transmissions for buttons 16.
1 Display the radio text you want to
store in memory.
Refer to Displaying radio text on this page.
2 Press any buttons 16 and hold to store
the selected radio text.
The memory number will display and the se-
lected radio text will be stored in memory.
The next time you press the same button on
the remote control in the radio text display the
stored text is recalled from memory.
RDS
En
24
Section
05