Pioneer DEH-P70BT - Manual (Page 72)

Introduction of audio
adjustments
1
1 Audio display
Shows the audio adjustments status.
1 Press Multi-Control to display the main
menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use Multi-Control to select AUDIO.
Turn to change the menu option; press to se-
lect.
The audio function name appears on the dis-
play.
3 Turn Multi-Control to select the audio
function.
Turn Multi-Control clockwise to switch be-
tween the audio functions in the following
order:
FAD (balance adjustment)EQ (equalizer
curve adjustment)F 80 Q 1W (equalizer
curve fine adjustment)Bass (bass and treble
level adjustment)Bass (bass and treble fre-
quency adjustment)LOUD (loudness)
Sub-W1 (subwoofer on/off setting)/NonFad
(nonfading output on/off setting)Sub-W2
(subwoofer setting)/NonFad (nonfading out-
put setting)HPF (high pass filter)SLA
(source level adjustment)ASL (automatic
sound levelizer)
# You can only switch to Bass when EQ-EX is
turned on and Custom is selected as the equali-
zer curve.
# When phone is selected as a source, you can-
not operate Adjusting equalizer curves on page
74, Fine-adjusting equalizer curve on page 74 and
Adjusting bass and treble on page 74.
# When the subwoofer controller setting is only
Preout :FULL, you cannot switch to Sub-W1.
(Refer to page 80.)
# You can select the Sub-W2 only when sub-
woofer output is turned on in Sub-W1.
# When the subwoofer controller setting is only
Preout :FULL, you can switch to the nonfading
output on/off setting. (Refer to page 80.)
# You can select the nonfading output setting
only when nonfading output is turned on in the
nonfading output on/off setting.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the display of each source, press
BAND.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Compensating for
equalizer curves (EQ-EX)
The EQ-EX function accentuates the effects of
each equalizer curve. Furthermore, you can
adjust bass and treble for each source when
Custom curve is selected.
% Press and hold EQ to turn EQ-EX on.
EQ-EX ON appears in the display. EQ-EX is
now on.
# To turn EQ-EX off, press and hold EQ.
Audio Adjustments
En
72
Section
14