Before using hands-free phoning, Making a phone call, Hands-free phoning – Pioneer DEH-P70BT User Manual

Page 39

Advertising

! The line-of-sight distance between this unit

and your cellular phone must be 10 meters or
less in sending and receiving voice and data
via Bluetooth technology. However, the trans-
mission distance may become shorter than
the estimated distance, depending on the en-
vironment in use.

! In order to use Bluetooth technology, devices

must be able to interpret certain profiles. This
unit is compatible with the following profiles.
GAP (Generic Access Profile)
SDAP (Service Discovery Application Pro-

file)

OPP (Object Push Profile)
HSP (Head Set Profile)
HFP (Hands Free Profile)

! When phone is selected as a source, volume

and equalizer curve are automatically chan-
ged to suitable settings for the phone source.
When the source is returned to another
source, volume and equalizer settings auto-
matically return to the original setting.

! When phone is selected as a source, you can-

not operate Adjusting equalizer curves on
page 74, Fine-adjusting equalizer curve on
page 74 and Adjusting bass and treble on page
74.

Before using hands-free

phoning

Before using this units hands-free phoning

with Bluetooth technology, it is necessary to

perform the following procedure. For more de-

tails concerning operation, refer to each sec-

tion.

1 Register your cellular phone to this

unit.

Prior to use, register your cellular phone fea-

turing Bluetooth technology to this unit. For

details, refer to Registering your cellular phone

featuring Bluetooth on page 42.

2 Connect your cellular phone to this

unit.

After registered, it is necessary to connect

your cellular phone to this unit. Without con-

necting, hands-free phoning is not available.

For more details, refer to Connecting a cellular

phone on page 43.

3 Adjust the volume level.

After connected, it is necessary to adjust the

volume of callers voice. Adjust the earpiece

volume on your cellular phone and this unit

memory the volume as a default setting.

# Callers voice volume and ring volume depend
on the type of the cellular phone.
# If the difference between the ring volume and
callers voice volume is big, overall volume level
may become unstable.
# If you adjust the volume level to zero (mute)
on your cellular phone while the phone is con-
nected to this unit via Bluetooth technology,
dont forget to readjust to proper volume level on
the cellular phone before you disconnect the cel-
lular phone from this unit.

Making a phone call

It is possible to make a phone call using this

unit.

1 Dial or select the phone number.

There are some methods to making a phone

call. For more details, refer to each section in

Introduction of advanced hands-free phoning

operation.

! Dial the phone number (Refer to Making a

call by entering phone number on page 48.)

! Voice recognition (Refer to Making a call via

voice recognition on the next page.)