Setting, Setting the automatic answering, Setting the incoming call rejection – Pioneer DEH-P70BT User Manual

Page 49: Setting the standby screen, Setting the automatic connection, Hands-free phoning

Advertising
background image

2 Press Multi-Control to select the desired

ring alert.

Press Multi-Control repeatedly to switch be-

tween the following settings:

OFF (ring alert off)BEEP 1 (ring alert 1)

BEEP 2 (ring alert 2)BEEP 3 (ring alert

3)

Setting the automatic

answering

If you set the automatic answering function

on, hands-free answering to incoming call is

possible.

1 Use Multi-Control to select

Auto answer.

Auto answer is displayed.

2 Press Multi-Control to turn automatic

answering on.

Auto answer ON appears in the display.

# To turn automatic answering off, press
Multi-Control again.

Setting the incoming call

rejection

You can reject an incoming call.

! Even if you rejected an incoming call, it is

recorded as a call register.

1 Use Multi-Control to select Refuse calls.

Refuse calls is displayed.

2 Press Multi-Control to turn automatic

call rejection on.

Refuse calls ON appears in the display.

# To turn automatic call rejection off, press
Multi-Control again.

Setting the standby screen

It is possible to select a standby screen from

movie, picture or off.

1 Use Multi-Control to select Background.

Background is displayed.

2 Push Multi-Control left or right to select

the desired standby screen.

Each time Multi-Control is pushed left or

right, one of the following is selected:

Background OFF (OFF)BACKGR.Video ON

(movie)BACKGR.Pict ON (picture)

Note

Selected item in Using different entertainment dis-
plays on page 83
doesnt reflect this function.

Setting the automatic

connection

It is possible to set the automatic connection

between your cellular phone and this unit. If

this function is set to on, connection between

your cellular phone and this unit will take

place automatically as soon as the two devices

are less than a few meters apart.

! With some cellular phones, it may not be

possible to perform the automatic connec-

tion.

1 Use Multi-Control to select

Auto connect.

Auto connect is displayed.

2 Press Multi-Control to turn automatic

connection on.

Auto connect ON appears in the display.

# To turn automatic connection off, press
Multi-Control again.

Hands-free phoning

En

49

English

Section

08

Advertising