Pioneer DEH-P70BT - Manual (Page 40)

2 Press Multi-Control to make a call.
When a connection has been established,
start talking.
# You can also perform this operation by press-
ing OFF HOOK on the remote control.
# Do not change the source while hands-free
phoning. Phone connection via Bluetooth tech-
nology may be failed.
3 Press PHONE to end the call.
Pressing PHONE while talking ends the call.
The estimated total time for the call appears in
the display.
# The estimated total time in the display may dif-
fer from the actual total time.
# You may hear a noise when you disconnect
the phone.
# You can also perform this operation by press-
ing ON HOOK on the remote control.
Taking a phone call
Answering an incoming call
It is possible to answer an incoming call even
if the source other than the telephone is se-
lected.
! It is possible to answer an incoming call
even if the sources are off.
! It is possible to answer an incoming call
automatically or manually.
1 When a call comes in, press
Multi-Control.
When a connection has been established,
start talking.
# You can also perform this operation by press-
ing OFF HOOK on the remote control.
# If you press OFF HOOK button on the cellular
phone when a call arrives, hands-free phoning
cannot be performed.
# If the private mode is selected on the cellular
phone, hands-free phoning may not be per-
formed.
2 Press PHONE to end the call.
Pressing PHONE while talking ends the call.
The estimated total time for the call appears in
the display.
# The estimated total time in the display may dif-
fer from the actual total time.
# You may hear a noise when you disconnect
the phone.
# You can also perform this operation by press-
ing ON HOOK on the remote control.
Rejecting an incoming call
It is possible to reject an incoming call.
! It is possible to reject an incoming call
automatically or manually.
% When a call comes in, press PHONE.
The call is rejected.
# You can also perform this operation by press-
ing ON HOOK on the remote control.
Note
Even if you reject an incoming call, it is recorded
in missed call list.
Standby mode
Standby mode let you use the various func-
tions related to hands-free phoning. For more
details, refer to Introduction of advanced
hands-free phoning operation on the next
page.
Making a call via voice
recognition
It is possible to make a call via voice recogni-
tion.
Hands-free phoning
En
40
Section
08