Adjusting equalizer curves 74, Fine-adjusting equalizer curve 74, Adjusting bass and treble 74 – Pioneer DEH-P70BT User Manual

Page 74: Adjusting bass and treble, Audio adjustments, Adjusting equalizer curves, Fine-adjusting equalizer curve

Advertising
background image

Adjusting equalizer curves

You can adjust the currently selected equalizer

curve setting as desired. Adjusted equalizer

curve settings are memorized in Custom.

1 Use Multi-Control to select EQ.

EQ appears in the display.

2 Push Multi-Control left or right to select

the equalizer band to adjust.

Each pushing Multi-Control left or right se-

lects equalizer bands in the following order:

Low (low)Mid (mid)High (high)

3 Push Multi-Control up or down to ad-

just the level of the equalizer band.

Each pushing Multi-Control up or down in-

creases or decreases the level of the equaliza-

tion band.

+6  6 is displayed as the level is increased

or decreased.

# You can then select another band and adjust
the level.

Note

If you make adjustments, Custom curve is up-
dated.

Fine-adjusting equalizer curve

You can adjust the center frequency and the Q

factor (curve characteristics) of each currently

selected curve band (Low/Mid/High).

Level (dB)

Center frequency

Q=2N

Q=2W

Frequency (Hz)

1 Use Multi-Control to select frequency

and the Q factor display.

Frequency and the Q factor (e.g., F 80 Q 1W)

appears in the display.

2 Push Multi-Control left or right to select

the desired frequency.

Each time Multi-Control is pushed left or

right, frequencies are selected in the following

order:

Low: 4080100160 (Hz)

Mid: 2005001k2k (Hz)

High: 3.15k8k10k12.5k (Hz)

3 Push Multi-Control up or down to select

the desired Q factor.

Each time Multi-Control is pushed up or

down, Q factor is selected in the following

order:

2N1N1W2W

Note

If you make adjustments, Custom curve is up-
dated.

Adjusting bass and treble

Use this function to adjust the bass and treble.

The ability to select the frequency as well as

the level gives you good control over the total

balance of audio.

! When EQ-EX is turned on and Custom is

selected as the equalizer curve, you can ad-

just bass and treble settings.

1 Use Multi-Control to select Bass (bass

and treble level adjustment).

Bass appears in the display.

# If the treble level has been previously ad-
justed, Treble will be displayed.

Audio Adjustments

En

74

Section

14

Advertising