Brocade Communications Systems 415 - Manual (Page 114)

100 Brocade Adapters Administrator’s Guide
53-1001583-01
Port Properties panel
A
Using the property panel
Refer to the following topics for specific procedures using this dialog box:
• “Configuring the port speed using HCM”
• “Specifying the maximum frame size using HCM”
• “Specifying path time out using HCM”
• “Configuring the HCM logging level using HCM”
• “Enabling and disabling persistent binding using HCM”
• “Enabling and disabling rate limiting on the adapter side using HCM”
Frame Data Field Size The frame size, in byres, of the port. The default is 2112. Select auto
to set the frame data field size automatically.
# of Lports The number of logical ports in the configuration.
Port Log Indicates whether port logging is enabled or disabled.
Operating Parameters
Path Time Out The value between 0 and 60 that specifies the time out session. The
default value is 30.
Logging Level The port logging level. Values include Log Critical, Log Error, Log
Warning, Log Info, and Log Invalid.
Target Rate Limit Indicates whether target rate limiting is on or off.
Default Rate Limit Select the target rate limit from the list. Options include 1 Gbps (the
default), 2 Gbps, and 4 Gbps.
FC-SP Parameters
Authentication Indicates whether FC-SP authentication is on or off.
Status The status of Fibre Channel Security Protocol (FC-SP) authentication.
Algorithm The configured authentication algorithm.
Group The DH Group (DH Null, group 0, is the only option).
Error Status The health status of the Fibre Channel Security Protocol (FC-SP)
parameters.
QoS Parameters
Configured QoS State Indicates whether QoS is enabled or disabled.
Operating QoS State Indicates whether QoS is online or offline.
Total BB Credit The total number of receive buffers.
Priority Levels QoS priority levels. Values include High, Medium, and Low.
Field Description