Brocade Communications Systems 415 - Manual (Page 146)

132 Brocade Adapters Administrator’s Guide
53-1001583-01
bios
B
b pwwn,lun Specifies the host boots from the LUN information defined by the target port
world wide name (PWWN) and LUN value (lun*). Specify the PWWN as a
colon-separated value and the LUN as a 64-bit decimal value.
The LUN must be the same LUN that you bound to the port using the storage
system’s management or configuration utility.
--disable Disables boot over SAN for the specified port, if enabled.
port_id Specifies the ID of the port for which you want to disable the boot over SAN
configuration.
Example
bcu bios
--
query 1/0
boot over SAN: enabled
port speed: Auto
Boot luns obtained from the flash
boot lun 0:
target wwn: 50:00:1f:e1:50:10:eb:da
lun: 0001-0000-0000-0000
Pre-boot Configuration:
Speed: 2/4/8/Auto for 8G cards
BIOS: Enabled/Disabled
Number of boot luns: 8
Boot LUN 0 : <Target’s WWN>, <LUN>
Boot LUN 1 : <Target’s WWN>, <LUN>
Boot LUN 2 : <Target’s WWN>, <LUN>
Boot LUN 3 : <Target’s WWN>, <LUN>
Boot LUN 4 : <Target’s WWN>, <LUN>
Boot LUN 5 : <Target’s WWN>, <LUN>
Boot LUN 6 : <Target’s WWN>, <LUN>
Boot LUN 7 : <Target’s WWN>, <LUN>
See Also “boot”