Brocade Communications Systems 415 - Manual (Page 137)

Brocade Adapters Administrator’s Guide 123
53-1001583-01
BCU commands
B
--statsclr <port_id>
BIOS commands
bcu bios --query <port_id>
--enable <port_id> [-s speed] [-o auto|flash|firstlun] [-p pos]
{-b pwwn,lun}*
--disable <port_id>
Boot commands
bcu boot --blunZone -c <cfg> -p <port_wwn> -r <rport_wwn> -l <lun_id | lun#>
--update [adapter_id] <image_file> [-a]
Debug commands
bcu debug --portlog <port_id>
--portlogclear <port_id>
--portlogctl <port_id> <enable | disable>
Diagnostic commands
Note: The sfpshow and beacon diagnostic tests are not available on the Brocade 804 mezzanine card.
bcu diag --sfpshow <port_id>
--tempshow <ad_id>
--beacon <port_id> {on | off} [<duration>]
--pciloopback <port_id> [-p <pattern>] [-c <frame_count>]
--loopback <port_id> [-t <loopback_type>] [-s <speed>]
[-c <frame_count>] [-p <pattern>]
--memtest <port_id>
--queuetest <port_id> [-q <queue_num>]
Driver configuration commands
Note: Driver configuration commands are supported only on Windows operating systems.
bcu drvconf --key <key_name>
--val <value>
Possible key_name and value ranges are:
•
key = bfa_ioc_queue_depth, value range [>0] default = 2048
•
key = bfa_lun_queue_depth, value range [>0] default = 32
•
key = ioc_auto_recover, value range [0-1] default = 1
•
key = rport_del_timeout, value range [>0] default = 90
•
key = msix_disable, value range [0-1] default = 1
FC diagnostic commands
bcu fcdiag --fcping <port_id> <rpwwn> [-l lpwwn]
--fctraceroute <port_id> <rpwwn> [-l lpwwn]
--fcecho <port_id> <rpwwn> [-l lpwwn]
--linkbeacon <port_id> {on|off}
--scsitest <port_id> <rpwwn> [-l lpwwn]
FCP initiator mode commands