Brocade Communications Systems 415 - Manual (Page 48)

34 Brocade Adapters Administrator’s Guide
53-1001583-01
HCM logging levels
3
FIGURE 11 Virtual Port Deletion dialog box
4. Click the check box that corresponds to one or multiple virtual ports you want to delete, and
click OK.
HCM logging levels
You can set the log level for the following modules:
• Agent communication log, where all messages are exchanged between the HCM GUI
application and the HCM agent.
• HCM debug log, where messages are logged locally.
If you do not set an HCM log level, DEBUG, which is the default, is used.
Configuring the HCM logging level using HCM
1. Select Configure >HCM Logging Levels from the Host Connectivity Manager.
The Configure HCM Logging Levels dialog box, shown in Figure 12 , displays.
FIGURE 12 Configure HCM Logging Levels dialog box
2. From both the Agent Communication Log and the HCM Debug Log lists, select one of the
following:
• Trace
• Debug, the most verbose and the default
• Info
• Warning
• Error
• Fatal, which is the least verbose.
3. Click Apply to apply the change.