Brocade Communications Systems 415 - Manual (Page 139)

Brocade Adapters Administrator’s Guide 125
53-1001583-01
BCU commands
B
--dfsize <port_id> [dfsize]
Target persistent binding commands
Note: Target persistent binding is available in Windows operating systems only.
bcu pbind --list <port_id> [<pwwn>]
--clear <port_id>
QoS commands
bcu qos --enable <port_id>
--disable <port_id>
--query <port_id>
--stats <port_id>
--statsclr <port_id>
Target rate limiting commands
bcu ratelim --enable <port_id>
--disable <port_id>
--query <port_id>
--defspeed <port_id> [<1|2|4>]
Remote port (rport) commands
bcu rport --list <port_id> [-l <lpwwn>]
--query <port_id> <rpwwn> [-l <lpwwn>]
--stats <port_id> <rpwwn> [-l <lpwwn>]
--statsclr <port_id> <rpwwn> [-l <lpwwn>]
--osname <port_id> [-l <lpwwn>]
Virtual port (vport) commands
Note: vport commands are not supported on Solaris platforms.
bcu vport --create <port_id> <vpwwn> [-n <vnwwn>] [-s <sname>]
--delete <port_id> <vpwwn>
--query <port_id> <vpwwn>
--stats <port_id> <vpwwn>
--statsclr <port_id> <vpwwn>