Fcdiag – Brocade Communications Systems 415 User Manual

Page 155

Advertising
background image

Brocade Adapters Administrator’s Guide

141

53-1001583-01

fcdiag

B

fcdiag

Runs diagnostic tests on Fibre Channel components.

NOTE

The fcdiag --linkbeacon command is not supported on the Brocade 804 HBA.

Synopsis

bcu fcdiag --fcping <port_id> <rpwwn> [-l lpwwn]

bcu fcdiag --fctraceroute <port_id> <rpwwn> [-l lpwwn]

bcu fcdiag --fcecho <port_id> <rpwwn> [-l lpwwn]

bcu fcdiag --linkbeacon <port_id> {on|off}

bcu fcdiag --scsitest <port_id> <rpwwn> [-l lpwwn]

Description

Fibre Channel diagnostic tests evaluate the integrity of Fibre Channel components.

Operands

--fcping

Determines the basic connectivity between two Fibre Channel network points
and monitors and measures network latency.

port_id

Specifies the ID of the port to which you want to issue a ping command.

rpwwn

Specifies the remote port world wide name to which you want to issue a ping
command.

-l lpwwn

Specifies the logical port world wide name. This is an optional argument. The
base port is specified as 0; otherwise, the port is a virtual port.

--fctraceroute

Reports on a SAN path, including node hops and latency data.

port_id

Specifies the ID of the port on which you want to run the fctraceroute
command.

rpwwn

Specifies the remote port world wide name.

-l lpwwn

Specifies the logical port world wide name. This is an optional argument. The
base port is specified as 0; otherwise, the port is a virtual port.

--fcecho

Sends an FC Echo Extended Link Services (ELS) request to a remote port.

port_id

Specifies the ID of the port from which you want to run the fcecho command.

rpwwn

Specifies the remote port world wide name on which you want to run the
fcecho diagnostic test.

-l lpwwn

Specifies the logical port world wide name. This is an optional argument. The
base port is specified as 0; otherwise, the port is a virtual port.

--linkbeacon

Blinks (toggles) the link beacon.

port_id

Specifies the ID of the port for which you want to run the linkbeacon
command.

on | off

Specifies if the linkbeacon test is on or off.

Advertising
This manual is related to the following products:

815, 425, 804, 825