Host configuration, In this chapter, Host security authentication – Brocade Communications Systems 415 User Manual
Page 31: Chapter 3, Chapter 3, “host configuration
Brocade Adapters Administrator’s Guide
17
53-1001583-01
Chapter
3
Host Configuration
In this chapter
•
•
•
•
•
•
•
•
•
Host security authentication
Use the HCM GUI or the Brocade command line utility (BCU) to display the authentication settings
and status. There are five well-known DH groups; however, only DH-CHAP group 0, called NULL DH,
is supported in this release.
NOTE
Security authentication is not supported on Solaris platforms.
Configuring security authentication using HCM (Host and HBA)
You can access the Fibre Channel Security Protocol Configuration dialog box by selecting the Host,
an HBA, or an HBA port from the device tree.
NOTE
Fibre Channel Security Protocol (FC-SP) is not available for Solaris platforms.
1. Select the appropriate device based on how you want to configure security authentication:
•
From the host level, select the host from the device tree.
•
From the HBA level, select the adapter from the device tree.
•
From an HBA port, select a port from the device tree.