Brocade Communications Systems 415 - Manual (Page 148)

134 Brocade Adapters Administrator’s Guide
53-1001583-01
boot
B
Example
bcu boot --blunZone -c BLUN -p 10:00:00:05:1e:41:9a:cb -r 50:00:00:05:1e:41:9a:ca
-l 09AABBCCDDEEFF00
To create the zone, copy the following line and run this command from the switch command line.
zonecreate “BFA_100000051E419ACB_BLUN”,”00:00:00:00:50:00:00:05;
00:00:00:01:1e:41:9a:ca; 00:00:00:02:09:aa:bb:cc, 00:00:00:03:dd:ee:ff:00”
See Also “bios”