Brocade Communications Systems 415 - Manual (Page 53)

Brocade Adapters Administrator’s Guide 39
53-1001583-01
Name configuration
3
The Configure Names dialog box, shown in Figure 15 , displays all the discovered and detached
(undiscovered) names.
FIGURE 15 Configure Names dialog box
3. Select a row and edit the name, the WWN, and the description, as needed.
4. Click OK.
Adding name entries
You can add up to 2000 names which are then stored in the HbaAliasdb.properties file.
The entries persist during reboot.
1. Select an HBA, an HBA port, or a Virtual Port from the device tree.
2. Select Configure > Names from the Host Connectivity Manager.
OR
Right-click a device from the device tree and select Configure Names.
3. Type a name that represents an adapter, port, or storage device into the Name field.
4. Type a valid WWN that corresponds to the name. Valid WWW types are as follows:
• Node
• Port
• Remote Port
• V_Port
• Unknown
5. Click OK to close the window.
The new component is added to the Name list.